Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection.
VALVE COVER GASKET – Remove & Replace – In-Line4 spark plugs were loose in the head, not properly tightened/torqued. We did properly reinstall.
ALTERNATOR DRIVE BELT & TORQUE MOUNT – Remove & Replace – In-Line4
Karen S. gave our service a 5 star review on 2/15/2024
AIR BAG SYSTEM – Diagnosis B1150 occupant detection fault. Performed occupant classification system initialization procedure. < apply varying weights to right front seat to calibrate specific weights & reprogram >
Manny A. gave our service a 5 star review on 8/24/2023
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection.
Steve P. gave our service a 5 star review on 12/1/2022
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection.
Kimberly P. gave our service a 5 star review on 11/1/2022
had a ECT coolant code P0117 (Engine running; and the ECM detected a resistance of less than 79 Ohms on the Engine Coolant Temperature (ECT) sensor signal circuit (a parameter of more than 284ºF) . sounds like low on compression filled radiator up with water and started it with the drive belt off and water shot out the radiator has internal head or head gasket problem
David H. gave our service a 5 star review on 4/11/2022